How to put together a trampoline?

You might be wondering how to put together a trampoline. Most trampoline manufacturers provide installation services, but you’ll have to pay a premium for it. If you’re on a budget, you may put the trampoline together with the aid of one or two friends or family members. However, it would help if you first learned how to put a trampoline together.

Consider this: you’ve just received a newly acquired trampoline! Its components, however, have not yet been assembled. What are your plans now?

Well, I’ll go through the issue in-depth, so sit back and discover the specifics. This article is also helpful for experts since it allows them to summarize the procedure in under a minute. Let’s get started!

How to put together a trampoline, how assemble a trampoline

How to put together a trampoline? [Step By Step Guide]

This section will guide you through my step-by-step guide based on my personal experience.

Step 1: Locate a suitable area for trampoline assembly

You must first find a good location for the trampoline to be installed. Find an appropriate place for your trampoline if the space is large enough.

If you’re going to put the trampoline in the backyard, be sure there aren’t any giant tree branches in the way. Additionally, level the ground and remove any huge weeds, scrubs, or tree limbs.

Avoid high-wind regions for safety reasons since strong gusts might uproot the trampoline. Above all, make sure there is enough room around the trampoline. A minimum clearance of 1.5 m is suggested on all sides, with a height clearance of more than 6 m from the ground.

Step 2: Layout and Check All Parts

Unbox the trampoline package before beginning trampoline construction to ensure that all components and accessories are included in the wrap. To do so, use the trampoline handbook to cross-mass the pieces you’ve gotten.

If a part is broken or missing, contact the manufacturer immediately for a replacement. Furthermore, you may group all equal parts into one category for easier identification.

Most trampolines arrive in three to five boxes, each containing a variety of parts and extras, such as:

  • T-sockets, legs, and trampoline frame
  • Poles for securing the enclosure
  • Netting for the enclosure
  • Pad with springs
  • Strings and anchoring kit

Furthermore, several trampoline manufacturers provide extras such as a ladder, basketball hoop, and other accessories with their trampoline bundles. You may also purchase them individually.

In this phase of the inspection, make sure that all of the pieces have the correct dimensions. And the most significant item that will considerably assist you in the trampoline setup procedure is the assembly manual. Proceed to the next step after checking that all trampoline parts are present and in good working order.

Step 3: Trampoline Assemblies Needed Tools

To completely assemble the trampoline, you’ll need the appropriate tools. Fortunately, most trampolines include trampoline assembly equipment. If you haven’t received them or have misplaced them, you may purchase them individually. These tools will assist you in putting up a trampoline correctly.

The following are the tools required for trampoline installation:

  • Tool for pulling springs or a hook
  • Head of Phillips Screwdriver
  • Mallets made of rubber
  • Drilling power
  • Set of wrenches
  • Gloves for protection

To pull and attach the springs, a spring puller tool or a spring tool alternative is utilized. Spring pulling can also be done with a spring rather than a spring puller. 

Furthermore, screw tightening is made easier with the use of Phillip’s head and a wrench set. The assembling procedure can be sped up with the use of a power drill. The springs are placed in place with the help of a rubber mallet. Hand gloves also protect the hand from injury.

Step 4: It’s Critical to Read the Trampoline Installation Manual

After you’ve double-checked that you have all of the trampoline parts and supplies, it’s time to read the trampoline installation instructions. The majority of assembly instructions will show you how to construct a trampoline step by step. Some trampoline setup procedures are unique. However, you may simply grasp the installation process by reading the manufacturer’s instructions.

Step 5: Assemble the Trampoline Frame and Legs

A trampoline’s frame is the most substantial component. T-sockets are used to attach the frame together in the initial phase of frame construction. T-joints will aid in the connection of the frame to the legs. Then, to finish the ring’s circular or rectangular shape, push one component into another. This allows you to observe the trampoline’s initial visible part.

At this point, you must join the legs to the frame. The rings provide locations for attaching all of the legs. Each leg should be connected to a previously attached T-section of the ring. Place the legs and rings in the correct positions so that the holes are aligned. Make use of the rubber mallet if necessary.

Then, using the included screws/bolts, secure the legs and T-sockets. In this case, a Phillips head screwdriver, wrench, or power drill will be useful. If you need to put anything together quickly, utilize the drill. As a result, the frame structure is ready for further pieces to be added to it.

Step 6: Putting the Trampoline Springs and Mat Together

Have you ever wondered how to put a trampoline mat on a trampoline frame or how to install springs on a trampoline frame? Don’t worry; if you follow the directions below, you’ll be able to do the work quickly.

There are two types of trampoline springs: open-end and closed-end. The closed-end is attached to the trampoline mat’s V-rings, while the open end is latched to the frame. The connection of the first four springs is critical.

So, get the earliest spring and start attaching it. Connect the closed end to the frame and the open end to the mat. A spring puller is a useful instrument for pulling and extending the spring into the proper position. Rubble mallet also aids in hitting and snapping the spring into position.

After it’s finished, the initial spring attachment connects to another spring that’s direct across and opposite the first. Then, at a 90-degree angle from the first two springs, add two more springs.

The mat is visible on the frame once the four springs are assembled. Now connect the rest of the springs in the same way you did the first four, or one by one until all of the springs are attached to the mat and frame.

Step 7: Trampoline Safety Pad Installation

The trampoline spring cover is constructed of soft material and is used to keep the trampoline safe. It shields jumpers from direct contact with springs and frames. There are various straps or Velcro in the spring cover that serve to secure the spring cover to the frame.

Step 8: Adding Poles and a Safety Net 

The enclosing net is supported by trampoline poles, which are vertical posts. The poles should be inserted into the frame holes or linked to the legs using screws or other attachments. To prevent jumpers from the poles’ direct impact, they are wrapped with soft foam or padding.

After the poles have been attached, look for a nice threading net with poles. Using the bungee cords, secure the enclosure net with the frame at the top. Tie the net bottom to the frame as well. Your trampoline now has a true safety enclosure.

Consider the position of the zipper door when assembling the whole enclosure. Place the net door in the proper location to make it easy to access and depart the trampoline.

Step 9: Using the Anchor Kit to Secure the Trampoline

Despite the fact that the trampoline is almost ready to jump, we recommend that the anchor kits be attached for trampoline safety. Wind stakes or anchor kits are included with many trampoline systems.

You can simply prevent the trampoline from blowing away by securing it with wind stakes. Trampoline anchor kits come in a variety of styles. Simply place them in the ground and secure them with your trampoline’s legs.

Step 10: Installing the Ladder and Other Accessories

A 3 to 4 step trampoline ladder is required to climb up onto the trampoline jump bed. To avoid displacement, fasten it with hooks as well. If you want to add extra trampoline accessories, such as a trampoline basketball hoop, a trampoline tent, or a water splash, you may do so as well.

Step 11: Perform a last inspection before jumping

So, you’ve completed the trampoline set up, but we urge that you go over all of the steps again to ensure that there are no safety issues. Examine all of the fasteners, joints, spring attachments, and other components before enabling children to jump there. Allow them to jump if you believe the trampoline is now safe for them.

FAQs on How to Put Together a Trampoline

Q. How long does it take to put together a trampoline?

Depending on their size and design, spring-based trampolines may be assembled in 2 to 4 hours. The spring-free trampolines, on the other hand, take 1.5 to 3 hours to set up. The subterranean trampoline, on the other hand, takes around 4 to 5 hours to fully install.

Q. How hard is it to set up a trampoline?

As a first-timer, you could have made a few dumb and frequent trampoline construction faults and issues. Some of them include:

  • After midway spring attachment, if you don’t keep the proper pattern in spring attachment, you can have a problem. To avoid this, start by attaching 4 to 8 springs in the above-mentioned arrangement before moving on to the rest.
  • It’s critical to tighten all of the legs and frame springs. Otherwise, it may result in leaping mishaps. As a result, tighten all of the loose springs.
  • It may be tough to put together a large trampoline by yourself. If you can’t handle anything on your own, don’t be afraid to ask for help. If you’re unsure, contact a handyman to properly install the trampoline.
  • Another trampoline assembly mistake might arise if you proceed with trampoline assembly without properly reading the documentation. Do not do this; instead, read the trampoline setup instructions prior to putting your trampoline together.

Q. How much does it cost to have a trampoline assembly?

The cost of trampoline assembly is determined by various factors, including trampoline size, shape, and location. The majority of professional trampoline assembly services charge between $100 and $300 per trampoline. 

However, the total installation of a sunken or in-ground trampoline is more expensive than that of an above-ground trampoline.

Q. What tools do you need to assemble a trampoline? 

Although you don’t need many tools to put up a trampoline, having them on hand is advantageous. A power drill or a Phillips head screwdriver will be required. A screwdriver is included in many products. You’ll also need a rubber mallet and a spring puller, both of which are included in the package.

Q. Can one person put together a trampoline?

You may be wondering how to put a trampoline together. If you’re on a budget, you may put the trampoline together with the aid of one or two friends or family members. It’s also a do-it-yourself project. However, you must first learn how to put together a trampoline.

Q. How do you put a trampoline on uneven ground?

Digging a ditch on the top side of the sloped yard and installing the trampoline legs there is a classic but effective approach to leveling the trampoline. Make sure the depth of the trench and the measured height are both the same. A level can be used to determine the depth accurately.

Also Read:


Whether you’re buying a new trampoline, need to reinstall it after the winter, or have another reason to install a trampoline, our step-by-step instructions will assist you. As a DIY enthusiast or a homeowner, you should know how to securely assemble a trampoline so that you can do it when time is of importance.

You need also be familiar with trampoline care and maintenance, as well as how to transport it, disassemble it, clean it, and other essential trampoline information.

You can create a nice, fun workout zone for the whole family by correctly installing a trampoline. As a result, follow the above-mentioned trampoline construction instructions carefully. And jump there for hours of entertainment and workout.